Classic carry cases

MDF and methacrylate classic series Carry Cases for store, display and transport miniatures.

The Clasic Transport Case come with 2 removable shelves with a useful width of 24cm and a useful height of 4cm, except for the two lower shelves (one in the case of the 4-shelved cases) which have a useful height of 6cm. If more shelves are needed, they can be ordered here. The shelves are also compatible with the horizontal cases and the stackable cases.

The magnetic sheet has a holding force of approximately 40g/cm2, enough to hold upside down almost any miniature with a steel sheet on its base or vice versa. In case of having neodymium magnets on the base of your miniatures, it will be necessary to choose the steel sheets as the fixing material.

Available options:
    ● Height: 4, 5, 6, 7 shelves
    ● Shelves useful depth: 8, 12, 16, 20cm
    ● Door material: MDF or Methacrylate
    ● Shelves: Wood, Wood + magnetic sheets (0.9mm thickness) or Wood + steel sheets (0.2mm thickness)

Outside dimensions:
    ● Width: 26.2cm
    ● Height: 20.8, 27.1, 31.4 y 35.7cm respectively
    ● Depth: 9.6, 13.6, 17.6 y 21.6cm respectively

The case is supplied unassembled (assembly instructions included). The steel and magnetic sheets are supplied cut to the corresponding size and not glued. Magnetic sheets have only one side magnetised. Assembly requires the use of contact or instant glue. The organiser tray is not included.

The methacrylate of the front door is highly transparent and has a very good scratch-resistant surface quality. The MDF of this product meets the requirements of Class E1 (low formaldehyde emissions) as defined by the European Standard EN 622-1:2003.